Thursday, May 9, 2013

How to Tell If There's a Mouse in Your House

How to Tell If There's a Mouse in Your House


ItemTitle

You've just settled down in bed and are twenty minutes into Letterman when you hear it: a light scratching overhead, accompanied by a squeak here and a squeal there. You assume that it's the wind making strange noises (after all, it is windy tonight!), or perhaps the house is just settling (you do live in an older home, so it would make sense...). Maybe the sounds are just the result of an overactive imagination. You hope!

How to Tell If There's a Mouse in Your House

Vacuum Weid Fan


Of course, you just can't get around the obvious conclusion - you have company. Whether it's a bird, a bat, a squirrel, or an entire family of mice, there's something up there. Given that you've had recurrent rodent problems, the latter option is probably the safest bet.


Vacuum Weid Fan

How to Tell If There's a Mouse in Your House



However, how can you be sure what type of animal you're dealing with - assuming that you even have unwelcome visitors at all? Before you can evict them, you need to know who "they" are.



How to Tell If There's a Mouse in Your House

Above all else, your first step is to inspect your home for signs of mice. Different problems call for different solutions; if your visitors are actually squirrels instead of mice, you'll need to develop a different strategy.

When canvassing your home, keep an eye out for these seven telltale signs:

1. Droppings and urine

Mouse droppings resemble a grain of rice; they are approximately the same size, but are black in color. Mice will not generally travel across open spaces, so you're more likely to find droppings along walls, pipes, and beams, as well as in storage areas and next to objects. "Urine pillars" are less common; they consist of mounds of grease, urine, and dirt. You can also use a blacklight to find individual urine droppings.

2. Chew marks

Look for tooth marks and wood shavings (similar in consistency to sawdust) around doors, baseboards, and cabinets. Marks on food containers can also be a clue that you have company.

3. Grease marks

When traveling alongside pipes, beams, and walls, mice may leave greasy smear marks, as dirt and oil from their fur rubs off onto the surfaces.

4. Tracks

Footprints and tail marks on dirty, dusty, or muddy surfaces can indicate activity. If you suspect that mice have taken up residence in an otherwise impeccably clean area of your house, lay down a sprinkling of talc to catch them in the act.

5. Nests

Mice construct nests of shredded paper and similar debris; check attics, basements, garages, storage areas, closets, and other dark, enclosed places for nests or "stolen" materials.

6. Sounds

You're more likely to hear squeaks and squawks at night, when the house is quiet and your guests are active.

7. Sightings

It's not uncommon to see mice during the day; although they are largely nocturnal, they do move about in daylight.

Now that you're certain that you're dealing with mice, it's time to start strategizing. Your plan of attack will actually come in three phases: first you need to clean up the messes you found; next, you must trap and release your unwelcome visitors; and finally, you'll mouse-proof your house so they can't get back in (and wouldn't want to, even if they could!). Good luck!


How to Tell If There's a Mouse in Your House






Thursday, April 18, 2013

How To Troubleshoot Your Computer Hardware

How To Troubleshoot Your Computer Hardware


ItemTitle

There could be many reasons why you'd want to troubleshoot your computer, well, one actually and that's because something is not working right. The process of troubleshooting is something you learn after working for a long time with computers. Often enough when there's a problem, nothing is going to explicitly tell you what is causing the problem and how you can fix it. By taking logical steps and walking through the process of troubleshooting you should be able to solve almost any computer problem, software or hardware related. It involves identifying the problem(s), finding the cause of that problem, determining the solution, executing that solution, and testing and checking that solution to see if it solves your problem.

How To Troubleshoot Your Computer Hardware

Vacuum Weid Fan


As an example let's say one day while using your computer the screen suddenly turns all black and you can't see anything. We found a problem now what would be the first step to take to fix it? First check to see if the monitor is on and is receiving power, most monitors when they have power, but no connection or connection problems with the computer will display a message that says this monitor is working, but make sure you check your cables. So the next logical step to take would be to check the cable to make sure it is properly connected and secured to the VGA slot behind your computer case and to make sure the monitor cable is plugged into the monitor. Now, here's where you have to decide what would be the next best course of action to take. you could either swap out your monitor with another monitor that you know is working to see if the problem is the monitor itself and nothing else or you can try to see if the problem is your graphics card. If your replacement monitor works, good, then you know your culprit is a bad monitor and you'll most likely have to get a new one, because monitors are dangerous and too costly service. If the replacement monitor you used shows up a black screen as well, the next thing you'd do is check to make sure the graphics card is properly seated in the motherboard, if it is and the display is still not showing up, then swap out the graphics card to see if your problem is fixed.


Vacuum Weid Fan

How To Troubleshoot Your Computer Hardware



Generally there are only so many steps you can take before you solve the problem and everything is back in order. Make sure that before you start testing and swapping out parts that the problem wasn't caused by you changing a software setting in Windows or some ambiguous option in the motherboard's BIOS that causes your problem.



How To Troubleshoot Your Computer Hardware

Motherboard

The motherboard is the heart of the computer, every part of the computer relies on the motherboard to function correctly. It maintains connection between every PC component and ensures that things are operating smoothly between them. Many signs of motherboard failure is that the computer won't boot up, not reaching the POST test, erratic system behavior, different combinations of components not working. Because everything is connected to the motherboard certain parts may or may not work correctly if the motherboard is faulty so be sure to test those parts before thinking they're dead and getting new ones.

Be sure to do a visual inspection of the motherboard to make sure all cables are seated properly, the fans are spinning, and that the CMOS battery is in it's proper place. Also check for any broken or leaking capacitors, those can immediately render a motherboard dead. Make sure that all of the jumpers are set correctly as well, you should be able to find jumper information in your motherboard's manual, and if you don't have the manual you should be able to find the manual on the Internet at the motherboard manufacturer's website.

Many of the problems caused by a bad motherboard is also similar to problems caused by a faulty or dying power supply, so be sure to check if the power supply is faulty or swap it out for another to see if your problem is fixed. If you have a spare motherboard you can try swapping out the motherboard to see if that solves your problem, if that's the case then the motherboard is most likely faulty. If you think the motherboard is faulty and it is still in warranty you should be able to send it back to the manufacturer for a new one with no hassle, sometimes they might even pay for the shipping & handling if it is a big problem that is happening with a certain line of motherboards. Make sure that when you open a motherboard you keep all of the packaging and the box, and if there are any stickers that will void the warranty if removed make sure you do NOT remove them, so that way it is easier to send back.

Power Supply

If you suspect your power supply is giving you trouble, make sure you check it out fast, because power supplies can make trouble with the rest of your system as well. Irregular voltages sent from the power supply can short circuit and overheat your components thus frying them and making them unusable. Some faulty power supplies have even caught on fire, but if you're lucky it might just smoke a little and start to smell. A few signals that your power supply is bad or is going bad would be erratic and seemingly random system behavior like system hangs and crashes, and burning smells along with smoke.

If you recently upgraded your system or added new hard drives, disk drives, a graphics card or anything for that matter, be sure to check if your power supply is being overloaded with hardware. A good way to check is to use a power supply calculator. One time when I upgraded my system with a new fancy PCI Express 16x Graphics card, well it was fancy back then, I had problems with the graphics card performing while in 3d games, it was all due to my power supply being unable give it enough juice on the 12v rails so it performed poorly and didn't act as it should have, I even swapped out the graphics card for another one believing it was bad, after checking the manufacturer's forums it seemed like a lot of people were having problems with faulty cards, so I figured mine must have been faulty too. After getting the new card it seemed like it performed better for a little bit longer, which could've just been some optimizations they did to circuit board. Seeing how they sent me an upgraded version of the same card, but it wasn't until I checked my power supply wattages that I found the real culprit.

The first thing to do to diagnose your power supply is check the power supply connectors, make sure everything is plugged into the motherboard and the power cable is plugged into the power supply, you wouldn't believe how many people forget to plug in their computer. Many power supplies also have a power switch on them so check to make sure that no one accidentally or purposefully switched it off maybe for a prank. Check the fan to see if it is spinning at the correct speed and if it's dusty vacuum it out. Determine if the power supply cables are giving out the right amount of voltage, if you computer will let you boot you should be able to check them in the BIOS menu to see if the correct voltages are being given. Normal power supplies give +3.3 volts DC, +5 volts DC, -5 volts DC, +12 volts DC, and -12 volts DC.

Memory

Faulty RAM can have many adverse effects on your system. Constant lockups, computer rebooting, memory error message (duh), system crashes, and sometimes refusing to boot up are all signs of memory errors. Though, these are also signs for motherboard, hard drive, and power supply problems too. Luckily for you if you think your memory is subject to causing a disruption in your system there are programs that can check the memory for it's performance and to see if it is generating any errors.

Memtest86+ is an amazing memory diagnostic program. It is based off of the original Memtest86 that has been around since 1994 and is used by system-builders, average joes, and professionals in the IT world. It's a standalone memory check test which means it can be easily run without a bootable operating system, that's good if you can't just seem to get your PC started and want to rule out your memory as quickly as possible.

How To Use Memtest86 With Your Floppy Drive To Test Your Memory

First go their website at http://www.memtest.org and select the most appropriate version to download. You can download the bootable iso or the Pre-compiled floppy drive depending on whether you want burn a CD or use your floppy drive. We're going to go into details on floppy method. Open up the .zip and extract the files to a folder, then click on install.bat, you will be asked to "Enter target diskette drive:". Type A and hit enter then it will ask you to insert a formatted diskette into drive A: and press -Enter-: after you hit enter it will write some files to your floppy so you can boot your computer with the floppy to test for errors. After the floppy has been formatted with Memtest86+, leave the floppy in your floppy drive and reboot your computer. Remember to set your floppy drive as the first boot device in your BIOS menu. The program will automatically load and perform the memory diagnostic tests on your computer. During the testing if there any errors they will show up and at the end of the test it will tell you how many errors you've had.

After testing your memory if you receive any errors you should make sure that your memory is okay either by swapping it out and seeing the problems still occur or try your memory in another system. If the memory passes the tests then you proceed to troubleshoot something else with good faith that your memory is fine.

Hard Drive

The hard drive is that ultimate safe to everything important on your computer. It keeps all of your information, files and folders, music, videos, favorite websites, and programs. With a bad hard drive there's no reason to have a computer. In terms of fixing a computer if the hard drive isn't salvageable then most people don't even want to bother with the rest, because their computer is probably a piece of junk that has been handed down from time to time. Generally when a hard drive is about to fail it's usually years down the road from first acquiring the computer. So the next best option rather than replacing the drive is to just buy a new computer, or build a new one, because your old one sure is probably not running as fast as it used to.

Luckily before your hard drive kicks the bucket there is usually a few warning signs:

Abnormally slow file transfers Problems with booting, especially when Windows is being loaded Corrupted files Disappearing files or folders Loud hard drive noise is a good sign that there is a mechanical problem going on inside

If your hard drive exhibits any of these signs be sure to transfer all of your files to another source immediately, and do not continue to do day-to-day activities with that hard drive. If it doesn't show any of these tell-tale signs, however you have a gut feeling that your hard drive is on the brink of destruction you can try using many different drive testing utilities available on the internet. The hard drive manufacturer usually has at least one qualified tool that you can download from their website and run. Other ways to check the health of your hard drive involves running the Windows Error Checking tool by right clicking on your hard drive in 'My Computer' then selecting 'Properties' and going to the 'Tool' and clicking on "Check Now", or checking the SMART status located in your motherboard's BIOS. SMART stands for Self-Monitoring, Analysis and Reporting Technology. Most motherboards nowadays has this technology. It should be automatically enabled in your BIOS, if it's not then your hard drive won't get checked. What it does is on boot up it will perform quick tests on your hard drive to ensure it is running correctly and it will continue to monitor it for any errors or abnormal problems that may occur as long as the computer is turned on.

Monitor

Watching movies, videos, playing games, and looking at NSFW material are all amazing things we can do on our computers. Yet there may come a day where you just want to get on your computer and relax in your computer room looking at all that NSFW material you have bookmarked under the "Special Sites" category, but you can't because your monitor won't turn on. No, you don't frump and punch holes in the walls to look for an outlet for your rage. You troubleshoot it, and hope to god that your monitor isn't broken!

When diagnosing a screen problem, half the time it's usually something very easy, like a cable coming loose, or the monitor getting unplugged accidentally; unfortunately the other half the time it's probably a problem that's related to your monitor being old, or a problem that's related to your graphics card instead. So you may have to diagnose both items at the same time to see which solves your problem.

First, check all your cables, I know this is probably getting a little old with the checking connections and everything, but so many computer problems can be avoided if people just remember that their computer isn't always going to stay the same way they left it. A foot could kick out a cable, a dog or a cat that got to curious, or almost anything can render half your hardware useless.

After checking all your cables, make sure your screen has power, if it has power and shows a message such as "This monitor is working correctly please check your cable" and shows bars of color on the screen, that means that your monitor is not getting a signal from your computer. Try swapping out the monitor for another one to see if it still says that message. If it does then that means the problem is most likely something to do with your graphics card not seated in the motherboard, or just isn't working properly, you may want to try swapping out another graphics card to see if that solves your problem.

Generally monitors don't have that many diagnosable problems. Either they work and they work well, or they don't work and you have to replace them. When working on a monitor you should never open them, they aren't meant to be serviced and contain high charged capacitors that hold lethal doses of electricity. We wouldn't want to read about a computer guy in the obituaries now would we?

Graphics Card

The glorious graphics card, it's an amazing thing really. It makes all those pretty HDR (High Dynamic Range) pictures look just that good, it keeps your games running smoothly, and your videos in HD. Yet these things can be pains when they're just not working right, because if something is wrong there's not a strict hardware or software solution, you have to analyze the current situation to see what's up.

First and foremost if you're having any problems with your graphics card, probably the best thing to try to do first is see if there an updated driver for it at the manufacturer's website that may solve the problem, or if there isn't an update try uninstalling your graphics drivers and reinstalling them this little action can solve so many problems.

If there's little jaggies or weird colorful mishaps known as artifacts appearing on your screen you may want to check the temperature of your graphics and make sure is getting enough cooling, and that the fan is working properly. If the cooling checks out okay you may also want to check your power supply ratings to see if it is giving enough juice to your graphics card. Nowadays most graphics cards need a lot of power on the 12v rails, make sure your power supply can give you that power that the graphics card needs.

Sound Card

Some of the typical problems people have with sound cards is either A) no sound or B) no sound. Sounds card typically aren't very expensive so having to replace one if the current one isn't working is no big deal. However, if you're one of those audiophile types who expect 100% original recording quality with your 0 sound card replacing one of those is as expected a lot more harder to do.

Sound Card Troubleshooting

Check speaker cables make sure they're all connected and plugged into the right spot on your sound card. Also check the speaker's power cables. Make sure windows volume is turned up and the volume is not muted, also make sure that you have all the wave and playback volume turned up and not muted. If you have 'Digital Output Only' checked in your Advanced Controls for Playback Controls, try unchecking it to see if that solves your non-sound problem. I found that if I have that checked my sound card won't give me any sound. Try reinstalling your sound card drivers, also try checking on the internet at the manufacturer's website for any updated drivers that may be available. They increase your sound card's compatibility with your system. If the previous tips didn't help, then you may just have to replace your sound card, or atleast swap it out for another one to see if it might be a problem related to your sound card's connection to the motherboard instead.
Processor

The processor is the actual thinking part of the brain of the computer. It does all the calculations needed to make a computer run, and does them all in split second timing. It determines how fast your computer generally runs, and most of the time is a bottle neck for systems that have had everything upgraded except the CPU.

If your processor's not working, it's not the end of the world, generally most processors that work correctly for a few weeks, should work correctly for the rest of it's lifespan, which varies from 5-10 years or so. As long as you're not overclocking the processor or letting it overheat too badly your processor should be fine, and it could just be a BIOS setting that's messed up, or a jumper setting, but for kicks just check to make the processor is seated properly and the heat sink is attached to the processor and the motherboard. The heat sink should be attached tightly to the motherboard and not have room to move about, you should be able to pick up your motherboard by grabbing onto the heat sink without any problems. Check in your motherboard manual to make sure all the jumpers are set correctly for your type of processor. Any jumpers set incorrectly can cause the processor to not work, or function correctly or at it's optimal speed. Also check the heat sink to see if it is cooling off the processor, if it's not doing a very good job you may want to look into investing in a better one that gets the job done.


How To Troubleshoot Your Computer Hardware






Tuesday, April 16, 2013

Why Weird Words Make Great Brand Names

Why Weird Words Make Great Brand Names


ItemTitle

When creating a truly great company name, the number one consideration should be the level of "engagement."

Why Weird Words Make Great Brand Names

Vacuum Weid Fan


"Engagement?" you ask incredulously.


Vacuum Weid Fan

Why Weird Words Make Great Brand Names



Yes... engagement.



Why Weird Words Make Great Brand Names

While there are all sorts of naming strategies... metaphors, acronyms, coined/invented, key attributes, positive connotations, etc., the one common denominator that separates the mediocre from the memorable, is the degree to which the name engages the mind of the consumer. Most new business owners opt for company names that inform and describe, leaving nothing to the imagination. They often fail to realize that the context surrounding the name (the ad, the store sign, the proposal, the brochure copy, etc.) will define what they do, so the name can be free to describe how they do it. In other words, no customer will hear or see the name in a mental vacuum. Yet this is the way we often judge names when "brainstorming". And it's why focus groups are such notoriously bad judges of good names. It's not the people that are flawed, it's the process itself. Most of the feedback takes the form of free associations, all in an effort to determine if a name is "good" or "bad." It goes something like this...

Interviewer: "What do you think of the name Monster?" Respondent: "Ew! They're scary and dangerous!"

Interviewer: "What about Amazon?" Respondent: "Jungle... drowning... snakes... piranhas..."

Interviewer: "Apple?" Respondent: "A bad apple spoils the whole bunch."

Interviewer: "Caterpillar?" Respondent: "Squishy, soft, and squirmy."

Interviewer to new business owner: "I think we can safely assume these would be bad brand names..."

So if it's not a matter of free associations, then what determines a good name? Again, it's that all important element known as "engagement." Engagement is what causes you to lean forward, ask twice, invite more information and pursue the conversation. A good name should invite a discussion, start a conversation and "engage" the other person's interest and attention. That's why Amazon, even though it says nothing about what it does, works better than Books-A-Million. Amazon is open and inviting and Books-A-Million is literal and descriptive. Amazon speaks to the process...flowing, easy, abundant. Books-A-Million speaks to the products... books. And while Amazon leaves room for the company to grow in any number of directions, Books-A-Million leaves the company in a bind. I once heard an ad for a company called Just Brakes. Since they had outgrown this narrow niche, they adopted a new tag line... "We're more than just brakes."

Let's take another example. Linens & Things is needlessly redundant since most people, after seeing a newspaper ad, or walking by the store window, will know the company sells linens and things. It would be better to use the name to capture some key strategic position or advantage, or to evoke a feeling or emotion. Is Linen & Things the best, the fastest, the biggest, the most service oriented, the trendiest? We simply don't know. They have described but they haven't evoked. They've explained but they haven't engaged.

The objection I routinely hear is "But with names like these, no one will know what I do!" And that's when I explain that trust is needed... trust in the power of context to fill in the blanks. That way the name is freed to paint a picture, engage the senses and position the brand to reflect not what you do, but how you do it.

So will any weird word work?

No.

Weird for weird sake will just leave the customer scratching his or her head in bewilderment of moving on in indifference. Bold, engaging names will create the desire to know more, and that's where you need to be ready to tell the story. The name then becomes a segue to a larger story. It starts with the name and tagline and then continues to the:15 second elevator speech and beyond.

One of our clients we named was TKO Surgical. When asked if that's a boxing reference, our client gives an emphatic "yes," explaining that they have a mission to both defend and fight for their clients' needs. They'll champion their cause and remain in their corner until the last bell sounds. Their tag line? "Technically Superior."

So whether a name is based on a metaphor, a key attribute, an acronym, or a positive connotation, the overarching goal is to create a name that engages. Perhaps that's why Albert Einstein asserted that "Imagination is more important than knowledge." If given the choice of engaging vs. informing, opt for a name that begs for more. It may seem weird, but the results can be wonderful.


Why Weird Words Make Great Brand Names






Saturday, April 13, 2013

Scrape Copper in Your Home

Scrape Copper in Your Home


ItemTitle

Copper is one metal that is starting to develop a strange behavior in the last few years, from an almost forgotten place among the wide used metals, copper has re emerged to become one of the most searched metals on earth, with a growing market for stolen copper and scrap copper, this is something that many do not know and fail to take advantage of.

Scrape Copper in Your Home

Vacuum Weid Fan


Metal can be found in many places around the house, especially if it is an old house, if you have access to old houses, many of which use a lot of heating devices and water tanks made of copper you can be pleasantly surprised at the money you can make selling this metal.


Vacuum Weid Fan

Scrape Copper in Your Home



Here are some tips on how to find scrap copper in your home and give you additional short time income that you can use on some of your miscellaneous expenses.



Scrape Copper in Your Home

The Kitchen. The kitchen is one of the places where you will find lots of scrap copper, some people have copper pots, copper cooking utensils and even copper plates. Sometimes coppers turns green with time or as it ages it turns into a different color so you barely notice them.

You can check if some of discolored metal utensils are copper by scraping a bit off its outer layer when it shows of a copper color then it is copper. Anyway your buyer of scrap copper can distinguish which are true coppers and which are not. So you can just bring out your unused or old metal utensils and just have them checked on the store.

The Living Room. Most of the copper that can be found on your living room are from decorative materials like chandeliers, picture frames and even side table tops are sometimes made from copper. You can check out the top of your fireplace from some old picture frames and check if they are copper and can be sold.

Sometimes even small decorative figurines are made out of copper so try to be on the look out for it. Firewood holder is also made out of copper.

The Garage. This is where most of the scrap copper in your old home can be found. This is a haven for finding copper cause this is where much of the heavy or metallic thing is being stored out.

In your garage you can start looking for bigger object like car parts that you have already got rid of and barbecue grills. Wires from your computers are also a good source of copper. Almost every wire consists of copper strings that are bundled up. Even motors are made up of copper so try to look out for small motors from your old vacuum cleaner or small appliances that are motor driven.

One last thing, in the past few years many people have been victimized by criminals that steal copper from any possible item, you are definitely encouraged to call the police and report any such actions, re using scrap copper could be nice, but please do this only for things that you own.


Scrape Copper in Your Home






Sunday, March 31, 2013

Weird Al's Hardware Store Lyrics

Weird Al's Hardware Store Lyrics





Click Here FLV MPlayer - Free Download

Video Clips. Duration : 3.87 Mins.



Weird Al's Hardware Store Lyrics



THANK YOU GUYS FOR OVER 20000 VIEWS !!!! My youth centers website: http://www.powerhouseyouthcenters.com/ MY CONTEST: IF YOU MAKE A VIDEO OF YOU SINGING THE...

Weird Al's Hardware Store Lyrics

Weird Al's Hardware Store Lyrics


Weird Al's Hardware Store Lyrics

Weird Al's Hardware Store Lyrics

No URL Weird Al's Hardware Store Lyrics

How To Troubleshoot Your Computer Hardware


ItemTitle

There could be many reasons why you'd want to troubleshoot your computer, well, one actually and that's because something is not working right. The process of troubleshooting is something you learn after working for a long time with computers. Often enough when there's a problem, nothing is going to explicitly tell you what is causing the problem and how you can fix it. By taking logical steps and walking through the process of troubleshooting you should be able to solve almost any computer problem, software or hardware related. It involves identifying the problem(s), finding the cause of that problem, determining the solution, executing that solution, and testing and checking that solution to see if it solves your problem.

How To Troubleshoot Your Computer Hardware

Vacuum Weid Fan


As an example let's say one day while using your computer the screen suddenly turns all black and you can't see anything. We found a problem now what would be the first step to take to fix it? First check to see if the monitor is on and is receiving power, most monitors when they have power, but no connection or connection problems with the computer will display a message that says this monitor is working, but make sure you check your cables. So the next logical step to take would be to check the cable to make sure it is properly connected and secured to the VGA slot behind your computer case and to make sure the monitor cable is plugged into the monitor. Now, here's where you have to decide what would be the next best course of action to take. you could either swap out your monitor with another monitor that you know is working to see if the problem is the monitor itself and nothing else or you can try to see if the problem is your graphics card. If your replacement monitor works, good, then you know your culprit is a bad monitor and you'll most likely have to get a new one, because monitors are dangerous and too costly service. If the replacement monitor you used shows up a black screen as well, the next thing you'd do is check to make sure the graphics card is properly seated in the motherboard, if it is and the display is still not showing up, then swap out the graphics card to see if your problem is fixed.


Vacuum Weid Fan

How To Troubleshoot Your Computer Hardware



Generally there are only so many steps you can take before you solve the problem and everything is back in order. Make sure that before you start testing and swapping out parts that the problem wasn't caused by you changing a software setting in Windows or some ambiguous option in the motherboard's BIOS that causes your problem.



How To Troubleshoot Your Computer Hardware

Motherboard

The motherboard is the heart of the computer, every part of the computer relies on the motherboard to function correctly. It maintains connection between every PC component and ensures that things are operating smoothly between them. Many signs of motherboard failure is that the computer won't boot up, not reaching the POST test, erratic system behavior, different combinations of components not working. Because everything is connected to the motherboard certain parts may or may not work correctly if the motherboard is faulty so be sure to test those parts before thinking they're dead and getting new ones.

Be sure to do a visual inspection of the motherboard to make sure all cables are seated properly, the fans are spinning, and that the CMOS battery is in it's proper place. Also check for any broken or leaking capacitors, those can immediately render a motherboard dead. Make sure that all of the jumpers are set correctly as well, you should be able to find jumper information in your motherboard's manual, and if you don't have the manual you should be able to find the manual on the Internet at the motherboard manufacturer's website.

Many of the problems caused by a bad motherboard is also similar to problems caused by a faulty or dying power supply, so be sure to check if the power supply is faulty or swap it out for another to see if your problem is fixed. If you have a spare motherboard you can try swapping out the motherboard to see if that solves your problem, if that's the case then the motherboard is most likely faulty. If you think the motherboard is faulty and it is still in warranty you should be able to send it back to the manufacturer for a new one with no hassle, sometimes they might even pay for the shipping & handling if it is a big problem that is happening with a certain line of motherboards. Make sure that when you open a motherboard you keep all of the packaging and the box, and if there are any stickers that will void the warranty if removed make sure you do NOT remove them, so that way it is easier to send back.

Power Supply

If you suspect your power supply is giving you trouble, make sure you check it out fast, because power supplies can make trouble with the rest of your system as well. Irregular voltages sent from the power supply can short circuit and overheat your components thus frying them and making them unusable. Some faulty power supplies have even caught on fire, but if you're lucky it might just smoke a little and start to smell. A few signals that your power supply is bad or is going bad would be erratic and seemingly random system behavior like system hangs and crashes, and burning smells along with smoke.

If you recently upgraded your system or added new hard drives, disk drives, a graphics card or anything for that matter, be sure to check if your power supply is being overloaded with hardware. A good way to check is to use a power supply calculator. One time when I upgraded my system with a new fancy PCI Express 16x Graphics card, well it was fancy back then, I had problems with the graphics card performing while in 3d games, it was all due to my power supply being unable give it enough juice on the 12v rails so it performed poorly and didn't act as it should have, I even swapped out the graphics card for another one believing it was bad, after checking the manufacturer's forums it seemed like a lot of people were having problems with faulty cards, so I figured mine must have been faulty too. After getting the new card it seemed like it performed better for a little bit longer, which could've just been some optimizations they did to circuit board. Seeing how they sent me an upgraded version of the same card, but it wasn't until I checked my power supply wattages that I found the real culprit.

The first thing to do to diagnose your power supply is check the power supply connectors, make sure everything is plugged into the motherboard and the power cable is plugged into the power supply, you wouldn't believe how many people forget to plug in their computer. Many power supplies also have a power switch on them so check to make sure that no one accidentally or purposefully switched it off maybe for a prank. Check the fan to see if it is spinning at the correct speed and if it's dusty vacuum it out. Determine if the power supply cables are giving out the right amount of voltage, if you computer will let you boot you should be able to check them in the BIOS menu to see if the correct voltages are being given. Normal power supplies give +3.3 volts DC, +5 volts DC, -5 volts DC, +12 volts DC, and -12 volts DC.

Memory

Faulty RAM can have many adverse effects on your system. Constant lockups, computer rebooting, memory error message (duh), system crashes, and sometimes refusing to boot up are all signs of memory errors. Though, these are also signs for motherboard, hard drive, and power supply problems too. Luckily for you if you think your memory is subject to causing a disruption in your system there are programs that can check the memory for it's performance and to see if it is generating any errors.

Memtest86+ is an amazing memory diagnostic program. It is based off of the original Memtest86 that has been around since 1994 and is used by system-builders, average joes, and professionals in the IT world. It's a standalone memory check test which means it can be easily run without a bootable operating system, that's good if you can't just seem to get your PC started and want to rule out your memory as quickly as possible.

How To Use Memtest86 With Your Floppy Drive To Test Your Memory

First go their website at http://www.memtest.org and select the most appropriate version to download. You can download the bootable iso or the Pre-compiled floppy drive depending on whether you want burn a CD or use your floppy drive. We're going to go into details on floppy method. Open up the .zip and extract the files to a folder, then click on install.bat, you will be asked to "Enter target diskette drive:". Type A and hit enter then it will ask you to insert a formatted diskette into drive A: and press -Enter-: after you hit enter it will write some files to your floppy so you can boot your computer with the floppy to test for errors. After the floppy has been formatted with Memtest86+, leave the floppy in your floppy drive and reboot your computer. Remember to set your floppy drive as the first boot device in your BIOS menu. The program will automatically load and perform the memory diagnostic tests on your computer. During the testing if there any errors they will show up and at the end of the test it will tell you how many errors you've had.

After testing your memory if you receive any errors you should make sure that your memory is okay either by swapping it out and seeing the problems still occur or try your memory in another system. If the memory passes the tests then you proceed to troubleshoot something else with good faith that your memory is fine.

Hard Drive

The hard drive is that ultimate safe to everything important on your computer. It keeps all of your information, files and folders, music, videos, favorite websites, and programs. With a bad hard drive there's no reason to have a computer. In terms of fixing a computer if the hard drive isn't salvageable then most people don't even want to bother with the rest, because their computer is probably a piece of junk that has been handed down from time to time. Generally when a hard drive is about to fail it's usually years down the road from first acquiring the computer. So the next best option rather than replacing the drive is to just buy a new computer, or build a new one, because your old one sure is probably not running as fast as it used to.

Luckily before your hard drive kicks the bucket there is usually a few warning signs:

Abnormally slow file transfers Problems with booting, especially when Windows is being loaded Corrupted files Disappearing files or folders Loud hard drive noise is a good sign that there is a mechanical problem going on inside

If your hard drive exhibits any of these signs be sure to transfer all of your files to another source immediately, and do not continue to do day-to-day activities with that hard drive. If it doesn't show any of these tell-tale signs, however you have a gut feeling that your hard drive is on the brink of destruction you can try using many different drive testing utilities available on the internet. The hard drive manufacturer usually has at least one qualified tool that you can download from their website and run. Other ways to check the health of your hard drive involves running the Windows Error Checking tool by right clicking on your hard drive in 'My Computer' then selecting 'Properties' and going to the 'Tool' and clicking on "Check Now", or checking the SMART status located in your motherboard's BIOS. SMART stands for Self-Monitoring, Analysis and Reporting Technology. Most motherboards nowadays has this technology. It should be automatically enabled in your BIOS, if it's not then your hard drive won't get checked. What it does is on boot up it will perform quick tests on your hard drive to ensure it is running correctly and it will continue to monitor it for any errors or abnormal problems that may occur as long as the computer is turned on.

Monitor

Watching movies, videos, playing games, and looking at NSFW material are all amazing things we can do on our computers. Yet there may come a day where you just want to get on your computer and relax in your computer room looking at all that NSFW material you have bookmarked under the "Special Sites" category, but you can't because your monitor won't turn on. No, you don't frump and punch holes in the walls to look for an outlet for your rage. You troubleshoot it, and hope to god that your monitor isn't broken!

When diagnosing a screen problem, half the time it's usually something very easy, like a cable coming loose, or the monitor getting unplugged accidentally; unfortunately the other half the time it's probably a problem that's related to your monitor being old, or a problem that's related to your graphics card instead. So you may have to diagnose both items at the same time to see which solves your problem.

First, check all your cables, I know this is probably getting a little old with the checking connections and everything, but so many computer problems can be avoided if people just remember that their computer isn't always going to stay the same way they left it. A foot could kick out a cable, a dog or a cat that got to curious, or almost anything can render half your hardware useless.

After checking all your cables, make sure your screen has power, if it has power and shows a message such as "This monitor is working correctly please check your cable" and shows bars of color on the screen, that means that your monitor is not getting a signal from your computer. Try swapping out the monitor for another one to see if it still says that message. If it does then that means the problem is most likely something to do with your graphics card not seated in the motherboard, or just isn't working properly, you may want to try swapping out another graphics card to see if that solves your problem.

Generally monitors don't have that many diagnosable problems. Either they work and they work well, or they don't work and you have to replace them. When working on a monitor you should never open them, they aren't meant to be serviced and contain high charged capacitors that hold lethal doses of electricity. We wouldn't want to read about a computer guy in the obituaries now would we?

Graphics Card

The glorious graphics card, it's an amazing thing really. It makes all those pretty HDR (High Dynamic Range) pictures look just that good, it keeps your games running smoothly, and your videos in HD. Yet these things can be pains when they're just not working right, because if something is wrong there's not a strict hardware or software solution, you have to analyze the current situation to see what's up.

First and foremost if you're having any problems with your graphics card, probably the best thing to try to do first is see if there an updated driver for it at the manufacturer's website that may solve the problem, or if there isn't an update try uninstalling your graphics drivers and reinstalling them this little action can solve so many problems.

If there's little jaggies or weird colorful mishaps known as artifacts appearing on your screen you may want to check the temperature of your graphics and make sure is getting enough cooling, and that the fan is working properly. If the cooling checks out okay you may also want to check your power supply ratings to see if it is giving enough juice to your graphics card. Nowadays most graphics cards need a lot of power on the 12v rails, make sure your power supply can give you that power that the graphics card needs.

Sound Card

Some of the typical problems people have with sound cards is either A) no sound or B) no sound. Sounds card typically aren't very expensive so having to replace one if the current one isn't working is no big deal. However, if you're one of those audiophile types who expect 100% original recording quality with your 0 sound card replacing one of those is as expected a lot more harder to do.

Sound Card Troubleshooting

Check speaker cables make sure they're all connected and plugged into the right spot on your sound card. Also check the speaker's power cables. Make sure windows volume is turned up and the volume is not muted, also make sure that you have all the wave and playback volume turned up and not muted. If you have 'Digital Output Only' checked in your Advanced Controls for Playback Controls, try unchecking it to see if that solves your non-sound problem. I found that if I have that checked my sound card won't give me any sound. Try reinstalling your sound card drivers, also try checking on the internet at the manufacturer's website for any updated drivers that may be available. They increase your sound card's compatibility with your system. If the previous tips didn't help, then you may just have to replace your sound card, or atleast swap it out for another one to see if it might be a problem related to your sound card's connection to the motherboard instead.
Processor

The processor is the actual thinking part of the brain of the computer. It does all the calculations needed to make a computer run, and does them all in split second timing. It determines how fast your computer generally runs, and most of the time is a bottle neck for systems that have had everything upgraded except the CPU.

If your processor's not working, it's not the end of the world, generally most processors that work correctly for a few weeks, should work correctly for the rest of it's lifespan, which varies from 5-10 years or so. As long as you're not overclocking the processor or letting it overheat too badly your processor should be fine, and it could just be a BIOS setting that's messed up, or a jumper setting, but for kicks just check to make the processor is seated properly and the heat sink is attached to the processor and the motherboard. The heat sink should be attached tightly to the motherboard and not have room to move about, you should be able to pick up your motherboard by grabbing onto the heat sink without any problems. Check in your motherboard manual to make sure all the jumpers are set correctly for your type of processor. Any jumpers set incorrectly can cause the processor to not work, or function correctly or at it's optimal speed. Also check the heat sink to see if it is cooling off the processor, if it's not doing a very good job you may want to look into investing in a better one that gets the job done.


How To Troubleshoot Your Computer Hardware









THANK YOU GUYS FOR OVER 20000 VIEWS !!!! My youth centers website: http://www.powerhouseyouthcenters.com/ MY CONTEST: IF YOU MAKE A VIDEO OF YOU SINGING THE...




Tags:

Wednesday, March 27, 2013

BMW E46 babble while turning

BMW E46 babble while turning





Click Here FLV MPlayer - Free Download

Video Clips. Duration : 1.58 Mins.



BMW E46 babble while turning



2004 BMW e46 making a clanking noise while turning only while it's cold, when the engine is warm no noise is made. Any help will be greatly appreciated.

BMW E46 babble while turning

BMW E46 babble while turning


BMW E46 babble while turning

BMW E46 babble while turning

No URL BMW E46 babble while turning

Electronic Music History and Today's Best Modern Proponents!


ItemTitle

Electronic music history pre-dates the rock and roll era by decades. Most of us were not even on this planet when it began its often obscure, under-appreciated and misunderstood development. Today, this 'other worldly' body of sound which began close to a century ago, may no longer appear strange and unique as new generations have accepted much of it as mainstream, but it's had a bumpy road and, in finding mass audience acceptance, a slow one.

Electronic Music History and Today's Best Modern Proponents!

Vacuum Weid Fan


Many musicians - the modern proponents of electronic music - developed a passion for analogue synthesizers in the late 1970's and early 1980's with signature songs like Gary Numan's breakthrough, 'Are Friends Electric?'. It was in this era that these devices became smaller, more accessible, more user friendly and more affordable for many of us. In this article I will attempt to trace this history in easily digestible chapters and offer examples of today's best modern proponents.


Vacuum Weid Fan

Electronic Music History and Today's Best Modern Proponents!



To my mind, this was the beginning of a new epoch. To create electronic music, it was no longer necessary to have access to a roomful of technology in a studio or live. Hitherto, this was solely the domain of artists the likes of Kraftwerk, whose arsenal of electronic instruments and custom built gadgetry the rest of us could only have dreamed of, even if we could understand the logistics of their functioning. Having said this, at the time I was growing up in the 60's & 70's, I nevertheless had little knowledge of the complexity of work that had set a standard in previous decades to arrive at this point.



Electronic Music History and Today's Best Modern Proponents!

The history of electronic music owes much to Karlheinz Stockhausen (1928-2007). Stockhausen was a German Avante Garde composer and a pioneering figurehead in electronic music from the 1950's onwards, influencing a movement that would eventually have a powerful impact upon names such as Kraftwerk, Tangerine Dream, Brain Eno, Cabaret Voltaire, Depeche Mode, not to mention the experimental work of the Beatles' and others in the 1960's. His face is seen on the cover of "Sgt. Pepper's Lonely Hearts Club Band", the Beatles' 1967 master Opus. Let's start, however, by traveling a little further back in time.

The Turn of the 20th Century

Time stood still for this stargazer when I originally discovered that the first documented, exclusively electronic, concerts were not in the 1970's or 1980's but in the 1920's!

The first purely electronic instrument, the Theremin, which is played without touch, was invented by Russian scientist and cellist, Lev Termen (1896-1993), circa 1919.

In 1924, the Theremin made its concert debut with the Leningrad Philharmonic. Interest generated by the theremin drew audiences to concerts staged across Europe and Britain. In 1930, the prestigious Carnegie Hall in New York, experienced a performance of classical music using nothing but a series of ten theremins. Watching a number of skilled musicians playing this eerie sounding instrument by waving their hands around its antennae must have been so exhilarating, surreal and alien for a pre-tech audience!

For those interested, check out the recordings of Theremin virtuoso Clara Rockmore (1911-1998). Lithuanian born Rockmore (Reisenberg) worked with its inventor in New York to perfect the instrument during its early years and became its most acclaimed, brilliant and recognized performer and representative throughout her life.

In retrospect Clara, was the first celebrated 'star' of genuine electronic music. You are unlikely to find more eerie, yet beautiful performances of classical music on the Theremin. She's definitely a favorite of mine!

Electronic Music in Sci-Fi, Cinema and Television

Unfortunately, and due mainly to difficulty in skill mastering, the Theremin's future as a musical instrument was short lived. Eventually, it found a niche in 1950's Sci-Fi films. The 1951 cinema classic "The Day the Earth Stood Still", with a soundtrack by influential American film music composer Bernard Hermann (known for Alfred Hitchcock's "Psycho", etc.), is rich with an 'extraterrestrial' score using two Theremins and other electronic devices melded with acoustic instrumentation.

Using the vacuum-tube oscillator technology of the Theremin, French cellist and radio telegraphist, Maurice Martenot (1898-1980), began developing the Ondes Martenot (in French, known as the Martenot Wave) in 1928.

Employing a standard and familiar keyboard which could be more easily mastered by a musician, Martenot's instrument succeeded where the Theremin failed in being user-friendly. In fact, it became the first successful electronic instrument to be used by composers and orchestras of its period until the present day.

It is featured on the theme to the original 1960's TV series "Star Trek", and can be heard on contemporary recordings by the likes of Radiohead and Brian Ferry.

The expressive multi-timbral Ondes Martenot, although monophonic, is the closest instrument of its generation I have heard which approaches the sound of modern synthesis.

"Forbidden Planet", released in 1956, was the first major commercial studio film to feature an exclusively electronic soundtrack... aside from introducing Robbie the Robot and the stunning Anne Francis! The ground-breaking score was produced by husband and wife team Louis and Bebe Barron who, in the late 1940's, established the first privately owned recording studio in the USA recording electronic experimental artists such as the iconic John Cage (whose own Avante Garde work challenged the definition of music itself!).

The Barrons are generally credited for having widening the application of electronic music in cinema. A soldering iron in one hand, Louis built circuitry which he manipulated to create a plethora of bizarre, 'unearthly' effects and motifs for the movie. Once performed, these sounds could not be replicated as the circuit would purposely overload, smoke and burn out to produce the desired sound result.

Consequently, they were all recorded to tape and Bebe sifted through hours of reels edited what was deemed usable, then re-manipulated these with delay and reverberation and creatively dubbed the end product using multiple tape decks.

In addition to this laborious work method, I feel compelled to include that which is, arguably, the most enduring and influential electronic Television signature ever: the theme to the long running 1963 British Sci-Fi adventure series, "Dr. Who". It was the first time a Television series featured a solely electronic theme. The theme to "Dr. Who" was created at the legendary BBC Radiophonic Workshop using tape loops and test oscillators to run through effects, record these to tape, then were re-manipulated and edited by another Electro pioneer, Delia Derbyshire, interpreting the composition of Ron Grainer.

As you can see, electronic music's prevalent usage in vintage Sci-Fi was the principle source of the general public's perception of this music as being 'other worldly' and 'alien-bizarre sounding'. This remained the case till at least 1968 with the release of the hit album "Switched-On Bach" performed entirely on a Moog modular synthesizer by Walter Carlos (who, with a few surgical nips and tucks, subsequently became Wendy Carlos).

The 1970's expanded electronic music's profile with the break through of bands like Kraftwerk and Tangerine Dream, and especially the 1980's when it found more mainstream acceptance.

The Mid 1900's: Musique Concrete

In its development through the 1900's, electronic music was not solely confined to electronic circuitry being manipulated to produce sound. Back in the 1940's, a relatively new German invention - the reel-to-reel tape recorder developed in the 1930's - became the subject of interest to a number of Avante Garde European composers, most notably the French radio broadcaster and composer Pierre Schaeffer (1910-1995) who developed a montage technique he called Musique Concrete.

Musique Concrete (meaning 'real world' existing sounds as opposed to artificial or acoustic ones produced by musical instruments) broadly involved the splicing together of recorded segments of tape containing 'found' sounds - natural, environmental, industrial and human - and manipulating these with effects such as delay, reverb, distortion, speeding up or slowing down of tape-speed (varispeed), reversing, etc.

Stockhausen actually held concerts utilizing his Musique Concrete works as backing tapes (by this stage electronic as well as 'real world' sounds were used on the recordings) on top of which live instruments would be performed by classical players responding to the mood and motifs they were hearing!

Musique Concrete had a wide impact not only on Avante Garde and effects libraries, but also on the contemporary music of the 1960's and 1970's. Important works to check are the Beatles' use of this method in ground-breaking tracks like 'Tomorrow Never Knows', 'Revolution No. 9' and 'Being for the Benefit of Mr. Kite', as well as Pink Floyd albums "Umma Gumma", "Dark Side of the Moon" and Frank Zappa's "Lumpy Gravy". All used tape cut-ups and home-made tape loops often fed live into the main mixdown.

Today this can be performed with simplicity using digital sampling, but yesterday's heroes labored hours, days and even weeks to perhaps complete a four minute piece! For those of us who are contemporary musicians, understanding the history of electronic music helps in appreciating the quantum leap technology has taken in the recent period. But these early innovators, these pioneers - of which there are many more down the line - and the important figures they influenced that came before us, created the revolutionary groundwork that has become our electronic musical heritage today and for this I pay them homage!

1950's: The First Computer and Synth Play Music

Moving forward a few years to 1957 and enter the first computer into the electronic mix. As you can imagine, it wasn't exactly a portable laptop device but consumed a whole room and user friendly wasn't even a concept. Nonetheless creative people kept pushing the boundaries. One of these was Max Mathews (1926 -) from Bell Telephone Laboratories, New Jersey, who developed Music 1, the original music program for computers upon which all subsequent digital synthesis has its roots based. Mathews, dubbed the 'Father of Computer Music', using a digital IBM Mainframe, was the first to synthesize music on a computer.

In the climax of Stanley Kubrik's 1968 movie '2001: A Space Odyssey', use is made of a 1961 Mathews' electronic rendition of the late 1800's song 'Daisy Bell'. Here the musical accompaniment is performed by his programmed mainframe together with a computer-synthesized human 'singing' voice technique pioneered in the early 60's. In the movie, as HAL the computer regresses, 'he' reverts to this song, an homage to 'his' own origins.

1957 also witnessed the first advanced synth, the RCA Mk II Sound Synthesizer (an improvement on the 1955 original). It also featured an electronic sequencer to program music performance playback. This massive RCA Synth was installed, and still remains, at the Columbia-Princeton Electronic Music Center, New York, where the legendary Robert Moog worked for a while. Universities and Tech laboratories were the main home for synth and computer music experimentation in that early era.

1960's: The Dawning of The Age of Moog

The logistics and complexity of composing and even having access to what were, until then, musician unfriendly synthesizers, led to a demand for more portable playable instruments. One of the first to respond, and definitely the most successful, was Robert Moog (1934-2005). His playable synth employed the familiar piano style keyboard.

Moog's bulky telephone-operators' cable plug-in type of modular synth was not one to be transported and set up with any amount of ease or speed! But it received an enormous boost in popularity with the success of Walter Carlos, as previously mentioned, in 1968. His LP (Long Player) best seller record "Switched-On Bach" was unprecedented because it was the first time an album appeared of fully synthesized music, as opposed to experimental sound pieces.

The album was a complex classical music performance with various multi-tracks and overdubs necessary, as the synthesizer was only monophonic! Carlos also created the electronic score for "A Clockwork Orange", Stanley Kubrik's disturbing 1972 futuristic film.

From this point, the Moog synth is prevalent on a number of late 1960's contemporary albums. In 1967 the Monkees' "Pisces, Aquarius, Capricorn & Jones Ltd" became the first commercial pop album release to feature the modular Moog. In fact, singer/drummer Mickey Dolenz purchased one of the very first units sold.

It wasn't until the early 1970's, however, when the first Minimoog appeared that interest seriously developed amongst musicians. This portable little unit with a fat sound had a significant impact becoming part of live music kit for many touring musicians for years to come. Other companies such as Sequential Circuits, Roland and Korg began producing their own synths, giving birth to a music subculture.

I cannot close the chapter on the 1960's, however, without reference to the Mellotron. This electronic-mechanical instrument is often viewed as the primitive precursor to the modern digital sampler.

Developed in early 1960's Britain and based on the Chamberlin (a cumbersome US-designed instrument from the previous decade), the Mellotron keyboard triggered pre-recorded tapes, each key corresponding to the equivalent note and pitch of the pre-loaded acoustic instrument.

The Mellotron is legendary for its use on the Beatles' 1966 song 'Strawberry Fields Forever'. A flute tape-bank is used on the haunting introduction played by Paul McCartney.

The instrument's popularity burgeoned and was used on many recordings of the era such as the immensely successful Moody Blues epic 'Nights in White Satin'. The 1970's saw it adopted more and more by progressive rock bands. Electronic pioneers Tangerine Dream featured it on their early albums.

With time and further advances in microchip technology though, this charming instrument became a relic of its period.

1970's: The Birth of Vintage Electronic Bands

The early fluid albums of Tangerine Dream such as "Phaedra" from 1974 and Brian Eno's work with his self-coined 'ambient music' and on David Bowie's "Heroes" album, further drew interest in the synthesizer from both musicians and audience.

Kraftwerk, whose 1974 seminal album "Autobahn" achieved international commercial success, took the medium even further adding precision, pulsating electronic beats and rhythms and sublime synth melodies. Their minimalism suggested a cold, industrial and computerized-urban world. They often utilized vocoders and speech synthesis devices such as the gorgeously robotic 'Speak and Spell' voice emulator, the latter being a children's learning aid!

While inspired by the experimental electronic works of Stockhausen, as artists, Kraftwerk were the first to successfully combine all the elements of electronically generated music and noise and produce an easily recognizable song format. The addition of vocals in many of their songs, both in their native German tongue and English, helped earn them universal acclaim becoming one of the most influential contemporary music pioneers and performers of the past half-century.

Kraftwerk's 1978 gem 'Das Modell' hit the UK number one spot with a reissued English language version, 'The Model', in February 1982, making it one of the earliest Electro chart toppers!

Ironically, though, it took a movement that had no association with EM (Electronic Music) to facilitate its broader mainstream acceptance. The mid 1970's punk movement, primarily in Britain, brought with it a unique new attitude: one that gave priority to self-expression rather than performance dexterity and formal training, as embodied by contemporary progressive rock musicians. The initial aggression of metallic punk transformed into a less abrasive form during the late 1970's: New Wave. This, mixed with the comparative affordability of many small, easy to use synthesizers, led to the commercial synth explosion of the early 1980's.

A new generation of young people began to explore the potential of these instruments and began to create soundscapes challenging the prevailing perspective of contemporary music. This didn't arrive without battle scars though. The music industry establishment, especially in its media, often derided this new form of expression and presentation and was anxious to consign it to the dustbin of history.

1980's: The First Golden Era of Electronic Music for the Masses

Gary Numan became arguably the first commercial synth megastar with the 1979 "Tubeway Army" hit 'Are Friends Electric?'. The Sci-Fi element is not too far away once again. Some of the imagery is drawn from the Science Fiction classic, "Do Androids Dream of Electric Sheep?". The 1982 hit film "Blade Runner" was also based on the same book.

Although 'Are Friends Electric?' featured conventional drum and bass backing, its dominant use of Polymoogs gives the song its very distinctive sound. The recording was the first synth-based release to achieve number one chart status in the UK during the post-punk years and helped usher in a new genre. No longer was electronic and/or synthesizer music consigned to the mainstream sidelines. Exciting!

Further developments in affordable electronic technology placed electronic squarely in the hands of young creators and began to transform professional studios.

Designed in Australia in 1978, the Fairlight Sampler CMI became the first commercially available polyphonic digital sampling instrument but its prohibitive cost saw it solely in use by the likes of Trevor Horn, Stevie Wonder and Peter Gabriel. By mid-decade, however, smaller, cheaper instruments entered the market such as the ubiquitous Akai and Emulator Samplers often used by musicians live to replicate their studio-recorded sounds. The Sampler revolutionized the production of music from this point on.

In most major markets, with the qualified exception of the US, the early 1980's was commercially drawn to electro-influenced artists. This was an exciting era for many of us, myself included. I know I wasn't alone in closeting the distorted guitar and amps and immersing myself into a new universe of musical expression - a sound world of the abstract and non traditional.

At home, Australian synth based bands Real Life ('Send Me An Angel', "Heartland" album), Icehouse ('Hey Little Girl') and Pseudo Echo ('Funky Town') began to chart internationally, and more experimental electronic outfits like Severed Heads and SPK also developed cult followings overseas.

But by mid-decade the first global electronic wave lost its momentum amidst resistance fomented by an unrelenting old school music media. Most of the artists that began the decade as predominantly electro-based either disintegrated or heavily hybrid their sound with traditional rock instrumentation.

The USA, the largest world market in every sense, remained in the conservative music wings for much of the 1980's. Although synth-based records did hit the American charts, the first being Human League's 1982 US chart topper 'Don't You Want Me Baby?', on the whole it was to be a few more years before the American mainstream embraced electronic music, at which point it consolidated itself as a dominant genre for musicians and audiences alike, worldwide.

1988 was somewhat of a watershed year for electronic music in the US. Often maligned in the press in their early years, it was Depeche Mode that unintentionally - and mostly unaware - spearheaded this new assault. From cult status in America for much of the decade, their new high-play rotation on what was now termed Modern Rock radio resulted in mega stadium performances. An Electro act playing sold out arenas was not common fare in the USA at that time!

In 1990, fan pandemonium in New York to greet the members at a central record shop made TV news, and their "Violator" album outselling Madonna and Prince in the same year made them a US household name. Electronic music was here to stay, without a doubt!

1990's Onward: The Second Golden Era of Electronic Music for the Masses

Before our 'star music' secured its hold on the US mainstream, and while it was losing commercial ground elsewhere throughout much of the mid 1980's, Detroit and Chicago became unassuming laboratories for an explosion of Electronic Music which would see out much of the 1990's and onwards. Enter Techno and House.

Detroit in the 1980's, a post-Fordism US industrial wasteland, produced the harder European influenced Techno. In the early to mid 80's, Detroiter Juan Atkins, an obsessive Kraftwerk fan, together with Derrick May and Kevin Saunderson - using primitive, often borrowed equipment - formed the backbone of what would become, together with House, the predominant music club-culture throughout the world. Heavily referenced artists that informed early Techno development were European pioneers such as the aforementioned Kraftwerk, as well as Yello and British Electro acts the likes of Depeche Mode, Human League, Heaven 17, New Order and Cabaret Voltaire.

Chicago, a four-hour drive away, simultaneously saw the development of House. The name is generally considered to be derived from "The Warehouse" where various DJ-Producers featured this new music amalgam. House has its roots in 1970's disco and, unlike Techno, usually has some form of vocal. I think Giorgio Moroder's work in the mid 70's with Donna Summer, especially the song 'I Feel Love', is pivotal in appreciating the 70's disco influences upon burgeoning Chicago House.

A myriad of variants and sub genres have developed since - crossing the Atlantic, reworked and back again - but in many ways the popular success of these two core forms revitalized the entire Electronic landscape and its associated social culture. Techno and House helped to profoundly challenge mainstream and Alternative Rock as the preferred listening choice for a new generation: a generation who has grown up with electronic music and accepts it as a given. For them, it is music that has always been.

The history of electronic music continues to be written as technology advances and people's expectations of where music can go continues to push it forward, increasing its vocabulary and lexicon.


Electronic Music History and Today's Best Modern Proponents!









2004 BMW e46 making a clanking noise while turning only while it's cold, when the engine is warm no noise is made. Any help will be greatly appreciated.




Tags:

Saturday, March 16, 2013

Electronic Music History and Today's Best Modern Proponents!

Electronic Music History and Today's Best Modern Proponents!


ItemTitle

Electronic music history pre-dates the rock and roll era by decades. Most of us were not even on this planet when it began its often obscure, under-appreciated and misunderstood development. Today, this 'other worldly' body of sound which began close to a century ago, may no longer appear strange and unique as new generations have accepted much of it as mainstream, but it's had a bumpy road and, in finding mass audience acceptance, a slow one.

Electronic Music History and Today's Best Modern Proponents!

Vacuum Weid Fan


Many musicians - the modern proponents of electronic music - developed a passion for analogue synthesizers in the late 1970's and early 1980's with signature songs like Gary Numan's breakthrough, 'Are Friends Electric?'. It was in this era that these devices became smaller, more accessible, more user friendly and more affordable for many of us. In this article I will attempt to trace this history in easily digestible chapters and offer examples of today's best modern proponents.


Vacuum Weid Fan

Electronic Music History and Today's Best Modern Proponents!



To my mind, this was the beginning of a new epoch. To create electronic music, it was no longer necessary to have access to a roomful of technology in a studio or live. Hitherto, this was solely the domain of artists the likes of Kraftwerk, whose arsenal of electronic instruments and custom built gadgetry the rest of us could only have dreamed of, even if we could understand the logistics of their functioning. Having said this, at the time I was growing up in the 60's & 70's, I nevertheless had little knowledge of the complexity of work that had set a standard in previous decades to arrive at this point.



Electronic Music History and Today's Best Modern Proponents!

The history of electronic music owes much to Karlheinz Stockhausen (1928-2007). Stockhausen was a German Avante Garde composer and a pioneering figurehead in electronic music from the 1950's onwards, influencing a movement that would eventually have a powerful impact upon names such as Kraftwerk, Tangerine Dream, Brain Eno, Cabaret Voltaire, Depeche Mode, not to mention the experimental work of the Beatles' and others in the 1960's. His face is seen on the cover of "Sgt. Pepper's Lonely Hearts Club Band", the Beatles' 1967 master Opus. Let's start, however, by traveling a little further back in time.

The Turn of the 20th Century

Time stood still for this stargazer when I originally discovered that the first documented, exclusively electronic, concerts were not in the 1970's or 1980's but in the 1920's!

The first purely electronic instrument, the Theremin, which is played without touch, was invented by Russian scientist and cellist, Lev Termen (1896-1993), circa 1919.

In 1924, the Theremin made its concert debut with the Leningrad Philharmonic. Interest generated by the theremin drew audiences to concerts staged across Europe and Britain. In 1930, the prestigious Carnegie Hall in New York, experienced a performance of classical music using nothing but a series of ten theremins. Watching a number of skilled musicians playing this eerie sounding instrument by waving their hands around its antennae must have been so exhilarating, surreal and alien for a pre-tech audience!

For those interested, check out the recordings of Theremin virtuoso Clara Rockmore (1911-1998). Lithuanian born Rockmore (Reisenberg) worked with its inventor in New York to perfect the instrument during its early years and became its most acclaimed, brilliant and recognized performer and representative throughout her life.

In retrospect Clara, was the first celebrated 'star' of genuine electronic music. You are unlikely to find more eerie, yet beautiful performances of classical music on the Theremin. She's definitely a favorite of mine!

Electronic Music in Sci-Fi, Cinema and Television

Unfortunately, and due mainly to difficulty in skill mastering, the Theremin's future as a musical instrument was short lived. Eventually, it found a niche in 1950's Sci-Fi films. The 1951 cinema classic "The Day the Earth Stood Still", with a soundtrack by influential American film music composer Bernard Hermann (known for Alfred Hitchcock's "Psycho", etc.), is rich with an 'extraterrestrial' score using two Theremins and other electronic devices melded with acoustic instrumentation.

Using the vacuum-tube oscillator technology of the Theremin, French cellist and radio telegraphist, Maurice Martenot (1898-1980), began developing the Ondes Martenot (in French, known as the Martenot Wave) in 1928.

Employing a standard and familiar keyboard which could be more easily mastered by a musician, Martenot's instrument succeeded where the Theremin failed in being user-friendly. In fact, it became the first successful electronic instrument to be used by composers and orchestras of its period until the present day.

It is featured on the theme to the original 1960's TV series "Star Trek", and can be heard on contemporary recordings by the likes of Radiohead and Brian Ferry.

The expressive multi-timbral Ondes Martenot, although monophonic, is the closest instrument of its generation I have heard which approaches the sound of modern synthesis.

"Forbidden Planet", released in 1956, was the first major commercial studio film to feature an exclusively electronic soundtrack... aside from introducing Robbie the Robot and the stunning Anne Francis! The ground-breaking score was produced by husband and wife team Louis and Bebe Barron who, in the late 1940's, established the first privately owned recording studio in the USA recording electronic experimental artists such as the iconic John Cage (whose own Avante Garde work challenged the definition of music itself!).

The Barrons are generally credited for having widening the application of electronic music in cinema. A soldering iron in one hand, Louis built circuitry which he manipulated to create a plethora of bizarre, 'unearthly' effects and motifs for the movie. Once performed, these sounds could not be replicated as the circuit would purposely overload, smoke and burn out to produce the desired sound result.

Consequently, they were all recorded to tape and Bebe sifted through hours of reels edited what was deemed usable, then re-manipulated these with delay and reverberation and creatively dubbed the end product using multiple tape decks.

In addition to this laborious work method, I feel compelled to include that which is, arguably, the most enduring and influential electronic Television signature ever: the theme to the long running 1963 British Sci-Fi adventure series, "Dr. Who". It was the first time a Television series featured a solely electronic theme. The theme to "Dr. Who" was created at the legendary BBC Radiophonic Workshop using tape loops and test oscillators to run through effects, record these to tape, then were re-manipulated and edited by another Electro pioneer, Delia Derbyshire, interpreting the composition of Ron Grainer.

As you can see, electronic music's prevalent usage in vintage Sci-Fi was the principle source of the general public's perception of this music as being 'other worldly' and 'alien-bizarre sounding'. This remained the case till at least 1968 with the release of the hit album "Switched-On Bach" performed entirely on a Moog modular synthesizer by Walter Carlos (who, with a few surgical nips and tucks, subsequently became Wendy Carlos).

The 1970's expanded electronic music's profile with the break through of bands like Kraftwerk and Tangerine Dream, and especially the 1980's when it found more mainstream acceptance.

The Mid 1900's: Musique Concrete

In its development through the 1900's, electronic music was not solely confined to electronic circuitry being manipulated to produce sound. Back in the 1940's, a relatively new German invention - the reel-to-reel tape recorder developed in the 1930's - became the subject of interest to a number of Avante Garde European composers, most notably the French radio broadcaster and composer Pierre Schaeffer (1910-1995) who developed a montage technique he called Musique Concrete.

Musique Concrete (meaning 'real world' existing sounds as opposed to artificial or acoustic ones produced by musical instruments) broadly involved the splicing together of recorded segments of tape containing 'found' sounds - natural, environmental, industrial and human - and manipulating these with effects such as delay, reverb, distortion, speeding up or slowing down of tape-speed (varispeed), reversing, etc.

Stockhausen actually held concerts utilizing his Musique Concrete works as backing tapes (by this stage electronic as well as 'real world' sounds were used on the recordings) on top of which live instruments would be performed by classical players responding to the mood and motifs they were hearing!

Musique Concrete had a wide impact not only on Avante Garde and effects libraries, but also on the contemporary music of the 1960's and 1970's. Important works to check are the Beatles' use of this method in ground-breaking tracks like 'Tomorrow Never Knows', 'Revolution No. 9' and 'Being for the Benefit of Mr. Kite', as well as Pink Floyd albums "Umma Gumma", "Dark Side of the Moon" and Frank Zappa's "Lumpy Gravy". All used tape cut-ups and home-made tape loops often fed live into the main mixdown.

Today this can be performed with simplicity using digital sampling, but yesterday's heroes labored hours, days and even weeks to perhaps complete a four minute piece! For those of us who are contemporary musicians, understanding the history of electronic music helps in appreciating the quantum leap technology has taken in the recent period. But these early innovators, these pioneers - of which there are many more down the line - and the important figures they influenced that came before us, created the revolutionary groundwork that has become our electronic musical heritage today and for this I pay them homage!

1950's: The First Computer and Synth Play Music

Moving forward a few years to 1957 and enter the first computer into the electronic mix. As you can imagine, it wasn't exactly a portable laptop device but consumed a whole room and user friendly wasn't even a concept. Nonetheless creative people kept pushing the boundaries. One of these was Max Mathews (1926 -) from Bell Telephone Laboratories, New Jersey, who developed Music 1, the original music program for computers upon which all subsequent digital synthesis has its roots based. Mathews, dubbed the 'Father of Computer Music', using a digital IBM Mainframe, was the first to synthesize music on a computer.

In the climax of Stanley Kubrik's 1968 movie '2001: A Space Odyssey', use is made of a 1961 Mathews' electronic rendition of the late 1800's song 'Daisy Bell'. Here the musical accompaniment is performed by his programmed mainframe together with a computer-synthesized human 'singing' voice technique pioneered in the early 60's. In the movie, as HAL the computer regresses, 'he' reverts to this song, an homage to 'his' own origins.

1957 also witnessed the first advanced synth, the RCA Mk II Sound Synthesizer (an improvement on the 1955 original). It also featured an electronic sequencer to program music performance playback. This massive RCA Synth was installed, and still remains, at the Columbia-Princeton Electronic Music Center, New York, where the legendary Robert Moog worked for a while. Universities and Tech laboratories were the main home for synth and computer music experimentation in that early era.

1960's: The Dawning of The Age of Moog

The logistics and complexity of composing and even having access to what were, until then, musician unfriendly synthesizers, led to a demand for more portable playable instruments. One of the first to respond, and definitely the most successful, was Robert Moog (1934-2005). His playable synth employed the familiar piano style keyboard.

Moog's bulky telephone-operators' cable plug-in type of modular synth was not one to be transported and set up with any amount of ease or speed! But it received an enormous boost in popularity with the success of Walter Carlos, as previously mentioned, in 1968. His LP (Long Player) best seller record "Switched-On Bach" was unprecedented because it was the first time an album appeared of fully synthesized music, as opposed to experimental sound pieces.

The album was a complex classical music performance with various multi-tracks and overdubs necessary, as the synthesizer was only monophonic! Carlos also created the electronic score for "A Clockwork Orange", Stanley Kubrik's disturbing 1972 futuristic film.

From this point, the Moog synth is prevalent on a number of late 1960's contemporary albums. In 1967 the Monkees' "Pisces, Aquarius, Capricorn & Jones Ltd" became the first commercial pop album release to feature the modular Moog. In fact, singer/drummer Mickey Dolenz purchased one of the very first units sold.

It wasn't until the early 1970's, however, when the first Minimoog appeared that interest seriously developed amongst musicians. This portable little unit with a fat sound had a significant impact becoming part of live music kit for many touring musicians for years to come. Other companies such as Sequential Circuits, Roland and Korg began producing their own synths, giving birth to a music subculture.

I cannot close the chapter on the 1960's, however, without reference to the Mellotron. This electronic-mechanical instrument is often viewed as the primitive precursor to the modern digital sampler.

Developed in early 1960's Britain and based on the Chamberlin (a cumbersome US-designed instrument from the previous decade), the Mellotron keyboard triggered pre-recorded tapes, each key corresponding to the equivalent note and pitch of the pre-loaded acoustic instrument.

The Mellotron is legendary for its use on the Beatles' 1966 song 'Strawberry Fields Forever'. A flute tape-bank is used on the haunting introduction played by Paul McCartney.

The instrument's popularity burgeoned and was used on many recordings of the era such as the immensely successful Moody Blues epic 'Nights in White Satin'. The 1970's saw it adopted more and more by progressive rock bands. Electronic pioneers Tangerine Dream featured it on their early albums.

With time and further advances in microchip technology though, this charming instrument became a relic of its period.

1970's: The Birth of Vintage Electronic Bands

The early fluid albums of Tangerine Dream such as "Phaedra" from 1974 and Brian Eno's work with his self-coined 'ambient music' and on David Bowie's "Heroes" album, further drew interest in the synthesizer from both musicians and audience.

Kraftwerk, whose 1974 seminal album "Autobahn" achieved international commercial success, took the medium even further adding precision, pulsating electronic beats and rhythms and sublime synth melodies. Their minimalism suggested a cold, industrial and computerized-urban world. They often utilized vocoders and speech synthesis devices such as the gorgeously robotic 'Speak and Spell' voice emulator, the latter being a children's learning aid!

While inspired by the experimental electronic works of Stockhausen, as artists, Kraftwerk were the first to successfully combine all the elements of electronically generated music and noise and produce an easily recognizable song format. The addition of vocals in many of their songs, both in their native German tongue and English, helped earn them universal acclaim becoming one of the most influential contemporary music pioneers and performers of the past half-century.

Kraftwerk's 1978 gem 'Das Modell' hit the UK number one spot with a reissued English language version, 'The Model', in February 1982, making it one of the earliest Electro chart toppers!

Ironically, though, it took a movement that had no association with EM (Electronic Music) to facilitate its broader mainstream acceptance. The mid 1970's punk movement, primarily in Britain, brought with it a unique new attitude: one that gave priority to self-expression rather than performance dexterity and formal training, as embodied by contemporary progressive rock musicians. The initial aggression of metallic punk transformed into a less abrasive form during the late 1970's: New Wave. This, mixed with the comparative affordability of many small, easy to use synthesizers, led to the commercial synth explosion of the early 1980's.

A new generation of young people began to explore the potential of these instruments and began to create soundscapes challenging the prevailing perspective of contemporary music. This didn't arrive without battle scars though. The music industry establishment, especially in its media, often derided this new form of expression and presentation and was anxious to consign it to the dustbin of history.

1980's: The First Golden Era of Electronic Music for the Masses

Gary Numan became arguably the first commercial synth megastar with the 1979 "Tubeway Army" hit 'Are Friends Electric?'. The Sci-Fi element is not too far away once again. Some of the imagery is drawn from the Science Fiction classic, "Do Androids Dream of Electric Sheep?". The 1982 hit film "Blade Runner" was also based on the same book.

Although 'Are Friends Electric?' featured conventional drum and bass backing, its dominant use of Polymoogs gives the song its very distinctive sound. The recording was the first synth-based release to achieve number one chart status in the UK during the post-punk years and helped usher in a new genre. No longer was electronic and/or synthesizer music consigned to the mainstream sidelines. Exciting!

Further developments in affordable electronic technology placed electronic squarely in the hands of young creators and began to transform professional studios.

Designed in Australia in 1978, the Fairlight Sampler CMI became the first commercially available polyphonic digital sampling instrument but its prohibitive cost saw it solely in use by the likes of Trevor Horn, Stevie Wonder and Peter Gabriel. By mid-decade, however, smaller, cheaper instruments entered the market such as the ubiquitous Akai and Emulator Samplers often used by musicians live to replicate their studio-recorded sounds. The Sampler revolutionized the production of music from this point on.

In most major markets, with the qualified exception of the US, the early 1980's was commercially drawn to electro-influenced artists. This was an exciting era for many of us, myself included. I know I wasn't alone in closeting the distorted guitar and amps and immersing myself into a new universe of musical expression - a sound world of the abstract and non traditional.

At home, Australian synth based bands Real Life ('Send Me An Angel', "Heartland" album), Icehouse ('Hey Little Girl') and Pseudo Echo ('Funky Town') began to chart internationally, and more experimental electronic outfits like Severed Heads and SPK also developed cult followings overseas.

But by mid-decade the first global electronic wave lost its momentum amidst resistance fomented by an unrelenting old school music media. Most of the artists that began the decade as predominantly electro-based either disintegrated or heavily hybrid their sound with traditional rock instrumentation.

The USA, the largest world market in every sense, remained in the conservative music wings for much of the 1980's. Although synth-based records did hit the American charts, the first being Human League's 1982 US chart topper 'Don't You Want Me Baby?', on the whole it was to be a few more years before the American mainstream embraced electronic music, at which point it consolidated itself as a dominant genre for musicians and audiences alike, worldwide.

1988 was somewhat of a watershed year for electronic music in the US. Often maligned in the press in their early years, it was Depeche Mode that unintentionally - and mostly unaware - spearheaded this new assault. From cult status in America for much of the decade, their new high-play rotation on what was now termed Modern Rock radio resulted in mega stadium performances. An Electro act playing sold out arenas was not common fare in the USA at that time!

In 1990, fan pandemonium in New York to greet the members at a central record shop made TV news, and their "Violator" album outselling Madonna and Prince in the same year made them a US household name. Electronic music was here to stay, without a doubt!

1990's Onward: The Second Golden Era of Electronic Music for the Masses

Before our 'star music' secured its hold on the US mainstream, and while it was losing commercial ground elsewhere throughout much of the mid 1980's, Detroit and Chicago became unassuming laboratories for an explosion of Electronic Music which would see out much of the 1990's and onwards. Enter Techno and House.

Detroit in the 1980's, a post-Fordism US industrial wasteland, produced the harder European influenced Techno. In the early to mid 80's, Detroiter Juan Atkins, an obsessive Kraftwerk fan, together with Derrick May and Kevin Saunderson - using primitive, often borrowed equipment - formed the backbone of what would become, together with House, the predominant music club-culture throughout the world. Heavily referenced artists that informed early Techno development were European pioneers such as the aforementioned Kraftwerk, as well as Yello and British Electro acts the likes of Depeche Mode, Human League, Heaven 17, New Order and Cabaret Voltaire.

Chicago, a four-hour drive away, simultaneously saw the development of House. The name is generally considered to be derived from "The Warehouse" where various DJ-Producers featured this new music amalgam. House has its roots in 1970's disco and, unlike Techno, usually has some form of vocal. I think Giorgio Moroder's work in the mid 70's with Donna Summer, especially the song 'I Feel Love', is pivotal in appreciating the 70's disco influences upon burgeoning Chicago House.

A myriad of variants and sub genres have developed since - crossing the Atlantic, reworked and back again - but in many ways the popular success of these two core forms revitalized the entire Electronic landscape and its associated social culture. Techno and House helped to profoundly challenge mainstream and Alternative Rock as the preferred listening choice for a new generation: a generation who has grown up with electronic music and accepts it as a given. For them, it is music that has always been.

The history of electronic music continues to be written as technology advances and people's expectations of where music can go continues to push it forward, increasing its vocabulary and lexicon.


Electronic Music History and Today's Best Modern Proponents!